Please save, share, and follow us:

This is a super-simple project, you just start by mixing a small batch of resin and adding the colorant you want to use for your spots or dots.  Let that resin thicken in the cup for 30 minutes to 1 hour, then apply in drips in your mold using your mixing wand or a Tiny Pointy Swab.  If you want you can Tidy up with Tiny Pointy Swabs.  Once resin has thickened up you can also manipulate the designs within your molds.

Let the spots set up for at least 12 hours, then mix another batch of resin with your background color and pour your castings as thin or thick as you like.  Let set up at least 12 hours before demolding, then turn your castings into whatever you want - jewelry, magnets, keychains, nametags,...