We are happy to offer E6000+ Plus Multi-Surface Odorless Adhesive. This is great for projects where you need a strong hold that requires a bit of flex, like adhering barrette backings to hair clips.
- E6000 PLUS offers virtually the same performance characteristics you love about E6000 but without the odor!
- It is crystal clear, offers superb UV RESISTANCE, is paintable
- Remains flexible, self-levels, maintains its permanent bond strength
- Washer-dryer safe
-
Waterproof
- Acid-free
- Formulated using a premium polymer technology and can be used on most any substrate and in just about any application
- Excellent adhesion to Brilliant Resin, wood, glass, fabric, ceramic, gems, metal, marble, fiberglass, concrete, most plastics, and much more
Follow these step-by-step directions when using E6000+ PLUS:
Surface should be clean, dry and free of dirt.
For best adhesion on smooth, non-porous materials, lightly roughen surface before use.
Ideal application temperature range is 50 to 90ºF (10 to 32ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200ºF (-40 to 93ºC) intermittently.
- Puncture seal in neck of tube using pointer cap.
- Apply directly to surfaces to be bonded. NOTE: For non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently.
- Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.
- Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.
- Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene.
- Store in a cool, dry place.
Tip: For quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive.
